The Commonwealth Fabric Wrapped Corner Trap Installation

Commonwealth Bass Traps may be attached to walls with a variety of hardware.

If the Commonwealth Traps are not required to be removable, the easiest method of installation is impaling clips.

• Impaling clips are shipped from the factory with the panels and should be screwed into the wall where the panels are to be installed. Care should be taken to screw the impaling clips into a stud when possible and to space the clips so that they will be evenly spaced on the back of the panel.

• The back of the Commonwealth Trap should be covered with a construction adhesive and placed onto the wall in the desired location.

• The impaling clips will hold the panel in place while the adhesive sets.