| AlphaSound™ Fighter Noise Barrier Walls |
 
|
Assembly Instructions
Step 1: After columns are fastened securely into place, attach bottom support angles to each side.
Step 2: After bottom support angles are in place, starting from the top, slide LSE units down between each “H” beam column – and into place. Step 3: After all LSE elements are in place, attach top channel cap slots in top channel. Cap should align with the studs welded to the“H” beam column secure with flat washers and nuts. |
Acoustical
Solutions, Inc
Ph: 800-782-5742 Fax: 804-346-8808