Installation Instructions
AlphaSorb™ Ceiling Tiles
Print Data Sheet

These ceiling tiles are designed to be dropped into an existing ceiling grid system. When it is necessary to cut the tiles to fit existing openings, follow these steps.

1. Measure your ceiling grid opening. Be sure to measure from inside to inside, then deduct 1/8” from your results. This will allow the tile to slip into the grid with ease.
2. Lay the tile on a clean and smooth surface and mark off your measurements on the back of the tile. Use a straight edge (preferably metal) as a guide for a sharp razor tool. Cut the tile, a couple of passes maybe required.

3. Drop the cut tile into your grid system.

 

Acoustical Solutions, Inc
Ph: 800-782-5742 Fax: 804-346-8808