Installation Hardware

  • Cable Crank
    Cable Cranks
    Cable Cranks are an economical, permanent wire or cable tightener. They are strong, lightweight and rust resistant. When installing, place wire or cable in slot on side of spool, wind the wire onto the spool, then wind the wire onto spool using a ½" drive ratchet, when at the desired tension simply put the wire clip through the two holes on crank to keep it from unwinding.


    » More details

  • Primacoustic corner impaler
    Corner Impaler™
    Turn room corners into bass traps by mounting acoustical wall panels across a 90° corner to form a deep cavity that absorbs bass. Primacoustic Corner Impalers™ are easy to install with pivoting darts for left-hand or right-hand mounting. Simply fasten four Corner Implaers™ to the walls and mount your acoustical panel to the impalers.  For extra measure of security, a dab of adhesive can be added between the impaler and the panel.   Now Sold in boxes of 8.


    » More details

  • Ceiling Hook
    Display Hooks
    These Plastic Display Hooks twists easily and quickly onto any standard ceiling grid system. When used with Plastic Tie Wraps, the display hooks make for an easy installation for any of our products that use grommets for mounting.


    » More details

  • Green Glue Applicator
    Green Glue Applicator
    Acoustical Solutions offers the Green Glue compound applicator for 5 gallon tubs of Green Glue. The applicator uses internal pressure, similar to a caulk-gun, to pull the compound into the cylinder for easily applying to floors, ceilings and walls.  


    » More details

  • Impaling Clip
    Impaling Clips
    Impaling Clips are designed to allow for quick and easy installations of our products. The Impaling Clips are a couple inches long with extruding metal stems. The clips get glued, screwed or nailed to a surface. Once in place they allow for easy installation of acoustical fiberglass products. *Minimum order of 100 Impaling Clips.


    » More details

  • 1 5/8
    Impaling Pins
    Impaling Pins are steel spindles with corrosion resistant coating. The base plate is 2" square and is made of galvanized steel with a pre-applied, pressure-sensitive adhesive (PSA) protected by a release paper. Standard lengths are 3/4" and 1 5/8". The 3/4" pins are to be used with 1" panels or boards and the 1 5/8" pins are to be used with the 2" panels or boards. Application of impaling pins is quick and simple. Peel away the release paper, position the hanger and press firmly onto the surface. That's all there is to it. The pins are quickly installed and hold the panel in place...


    » More details

  • installation anchor
    Installation Anchors
    Acoustical Solutions offers 3 different types of Installation Anchors to assist you with the installation of its hanging baffles and banners. There is an anchor for drywall, concrete and block walls.


    » More details

  • Primacoustic Offset Impaler™
    Offset Impaler™
    Increase bass absorption by introducing a 3½" air space behind any acoustical sound panel. The Offset Impaler™ will lower the effective frequency by as much as an octave. Features a U-shaped design with pivoting darts for left-hand or right-hand installations.  For an extra measure of security, a dab of adhesive can be added between the impaler and the panel.   Now Sold in Boxes of 8 for Only $69.99!


    » More details

  • Track Hardware
    Track Hardware for AudioSeal™ Blankets
    Track hardware is specially designed to create free standing acoustical curtain enclosures as well as providing an economic method of installing acoustical curtain systems and wall applications. Hardware is available for floor installation as well as suspended, ceiling, beam and wall mounted systems. Hardware systems are easy to assemble, enlarge, disassemble and relocate. Call for pricing on curved track, wall mount brackets, floor mount connectors, double track, and heavy duty track or to have a sales person custom design a track configuration to meet your needs.  ...


    » More details

  • Velcro
    Velcro ®
    At Acoustical Solutions, we use only the highest quality industrial strength Velcro®. Our Velcro® comes with a high strength PSA (pressure sensitive adhesive) backing for quick and easy installations. All Velcro® purchases include both sides (hook and loop) of the Velcro®.   Sold by the Linear Foot.  


    » More details