Housed Spring Isolation Mounts provide a packaged solution to troublesome vibration problems. Since the static deflection of the spring element is much greater than that provided by most rubber materials, these units will perform where it is necessary to establish low natural frequencies or to use a mounting that is more yielding than the supporting floor. The housed mountings are specifically designed for noise and vibration free application in critical areas on light concrete or wooden floors.

Semi-circular Neoprene sponge inserts limit movement during strut and stop and prevent contact between the projections of the upper and lower semi-steel castings. These inserts are designed for a minimum of damping in all directions to allow the springs to function properly and develop installed efficiencies that are very close to the theoretical. Non-adjustable inserts are recommended for all air conditioning applications under compressors, air handling units, centrifugal fans and most other constant frequency vibration problems.

Our standard housed isolation spring mount is rated at 75 pounds per mount. However they are available in 45 lbs., 125 lbs., 200 lbs., and 310 lbs. at no additional cost.

Uses in a Variety of Applications