AlphaSorb™ Fabric Wrapped Ceiling Banners Installation

AlphaSorb™ Fabric Wrapped Ceiling Banners with grommets:

	Figures 1, 2 & 3: Illustrates a snug attachment of AlphaSorb™ ceiling banners using screws and color matched washers directly to the underside of a deck or ceiling. AlphaSorb™ ceiling banners provide a festoon appearance when installed.
	Figures 4 & 5: Illustrates installation of AlphaSorb™ ceiling banners on cables. Cables are stretched horizontally 2' - 4' on center and anchored on both ends. AlphaSorb™ ceiling banners are installed perpendicular to cables and are anchored at ends using plastic tie wraps or wire ties.

AlphaSorb™ Fabric Wrapped Ceiling Banners with wooden stays:

	AlphaSorb™ attached directly to ceiling or deck: Fig. 1 Overhead view of a AlphaSorb™ Ceiling Banner with wooden stays both ends
	Fig. 2 & 3 Use screw and fender washer, self tapping screw or toggle bolt (such as our plastic toggle bolt product #Anch1) through the predrilled holes in the wooden stays to fasten the AlphaSorb™ ceiling banner into place.

	AlphaSorb™ attached directly to beams: Fig. 4 & 5 Beam clamps can be attached securely with bolts to the wooden stays at both ends of the AlphaSorb™ Ceiling Banners. With the beam clamp attached directly to the wooden stays, you clamp onto the same side of the beam as the banner is on and you must be securely bolted to the beam or bar joist.