Enkasonic™ Floor Underlayment

| More
Jump to Cart
Add To Catalog

Product ID: None

Included items in this product:

  • LOADING...

 

  • Enkasonic floor underlayment
  • Greener Product Certified

Enkasonic™ is an acoustic floor underlayment material made up of extruded nylon filaments which form a three dimensional core that has a nonwoven fabric heat bonded to its upper surface.

The durable, yet pliable, construction of Enkasonic™ sound control matting lowers both structural and airborne sound transmission by its ability to convert and store vibrational energy.

Recommended applications for Enkasonic™ floor underlayment include commercial and residential multi-story buildings such as condominiums, apartments, office buildings, hotels, schools, athletic floors and more.

Please call our technical sales staff at 1-800-782-5742 with any questions on Enkasonic™ sound control matting or other acoustic floor underlayment products.

Call 1-800-782-5742 for quantity discounts

Name
 Roll Size Coverage 1-3 Rolls 4+ Rolls
Enkasonic™ 39" x 111' 360 sqft $492.00 Special Price - Call
Perimeter Isolation 3" x 250' 250 linear ft $  80.00

For more information on this product, contact our sales department.

Product Options & Price
Prod # Name Price Unit Qty  

The above products are all of the possible variations for Enkasonic™ Floor Underlayment.
Enter the number of each item required in the Qty box, and click Add to Cart.
FLRENKASONIC Enkasonic $492.00 Each
FLRENKA-ISO Perimeter Isolation $80.00 Each

Product Questions & Comments (5 items)

  • Add a Comment / Question

  • Please recommend soundproofing products for use under carpeting when the subfloor is a concrete slab. Is there a product which does not require plywood layers or a cementitous topping over the soundproofing layer?

    Michael Lambdin - Lambdin Studios

    30 Positive

  • Michael - We would recommend exploring the QuietPad product, which doesn't require layers to be applied on top of it. See the product page at http://www.acousticalsolutions.com/33~quietpad

    Eric Peters - Acoustical Solutions, Inc.

    11 Positive

  • Michael - We would recommend exploring the QuietPad product, which doesn't require layers to be applied on top of it. See the product page at http://www.acousticalsolutions.com/33~quietpad

    Eric Peters - Acoustical Solutions, Inc.

    10 Positive

  • Please recommend a product to reduce noise from air conditioners located on rooftops from proceeding to the floor below.

    Rick Gill - Strategic Concepts inc.

    4 Positive

  • Rick - There are several events occurring here. The 1st is structural noise or vibration. This emanates through the condensers and into the roof structural supports and thereby migrates into the rooms below. This is "heard" as low frequency hum. I suggest 2 things here.

    A) Remove the pad it sits on and lay down a rubber or neoprene mat, then a concrete pad 3-4" thick. The greater mass slows the vibration. These plastic condenser pads used today actually act like a snare drum and multiply the noise.

    B) install some isolation pads or mounts such as those ASI sells by Mason Industries.

    Next, we can mitigate the airborne noise with a noise screen system. Specifically an absorptive wall needs to be on 3 to 4 sides. The height needs to be at least 2' above the top of the unit. There needs to be at least 2' interior clearance between the unit and the walls to maintain airflow. No space needs to be at the bottom other than about 1-2" to allow for water and snow run off. The screens will reduce noise levels in the 10-15dBa range or a 50% to 75% anticipated noise reduction.

    Jack Kay - Acoustical Solutions, Inc.

    4 Positive

  • Add a Comment / Question

Customers who bought this product also bought (2 items)


Shop All Products